Wastewater treatment plant installation is a mandatory method to protect the environment. Waste water treatment plant is mandatory in every industrial sector. It is a universally accepted law that wastewater treatment should be considered before any industry. Any waste water treatment is not possible without aeration. Roots blowers are required for aeration for each factory. Fine bubble diffuser is required with Roots Blower.
Fine bubble air diffusers produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank or pond and provide substantial and efficient mass transfer of oxygen to the water. This ventilation process is operated by roots air blower.
Air disk diffuser comes in different sizes such as.
Disk Membrane Diffuser Diameter 200mm 8 inch, Air flow 1-3.8 m³/h, Service Area: 0.15-0.6m2, Bubble Size: 1-2mm, Disk Diffuser Membrane Thickness: 2 mm, Connector 3/4'' NPT male thread, Service Life: 5 year.
Volume Air Flow and Air Pressure: Firstly, you need to measure the required amount of air pressure and air volume of your system to assess which roots blower will deliver your requirement at the lowest power consumption possible.
These roots air blowers depend on different pressure and capacities.
3 lobe roots blowers are much more powerful than other blowers that work deeper into the water.
The list of roots blowers supplied by OSMOSIA Company is given.
Three Lobe 2HP 220V/50Hz Roots Blower, Air Flow 40-50 m3 per hour, Speed: 1450 RPM.
Three Lobe 3 HP 220V/50Hz Roots Blower, Air Flow 50-70 m3 per hour, Speed: 1450 RPM.
Three Lobe 5 HP 220V/50Hz Roots Blower, Air Flow 80-130 m3 per hour, Speed: 1450 RPM.
Three Lobe 5HP 380V/50Hz Roots Blower Air Flow 80-130 m3 per hour, Speed: 1450 RPM.
Three Lobe 7HP 380V/50Hz Roots Blower Speed: 1450 RPM.
Three Lobe 10HP 380V/50Hz Roots Blower Speed: 1450 RPM.
